Graham – New Pricing – Effective date January 2008

GR9-0 Complete Update

April 28, 2008

-

Due to the elimination of 7 ply product and certain other attributes it will be necessary to create new inventory products or assign the 5 ply equivalent to exiting inventory. We have removed all restrictions from the series during the transition period and will be reset at a later date.

-

Discontinued – No longer available

GCD – MDO

GMM - All

Veneers: GRO, BRO, BRB, PHR PR6 (PHR is a primed product/PR6 not required)

FD, FD5, PC7, SL7, EC7, FD7, SHC7, IH

FP – Flush w/viewer (Use Flush Door Apply Viewer Prep)

F2P – Flush w/2viewers (Use Flush Door Apply 2 Viewer Preps)

STB – sealed top and bottom rails only

SLE – sealed edges only

IH – Institutional Hollow Core

Prefinish Plant on Mouldings – STD, Clear and Custom – Use Wood Moulding Charge

Prefinish Wicket Doors – STD, Clear and Custom – Use standard door charge

-

New

GPD - MDO

Veneers GMD Series – Was PSRO – Now GMO, Was RNB - Now GMB

FD45, FD5-45, FD60, FD5-60, FD90, FD5-90

AP, AP5, AP20, AP5-20, AF45, AF5-45

-

Valid Cores By Series

GPD         GCD   GMD

PC/PC-20    X     X

EC/EC-20    X

SL/SL-20    X

AP/AP-20    X

AP45        X

*FD45       X

*FD60       X

*FD90       X

PC5/PC5-20

EC5/EC5-20

SL5/SL5-20

AP5/AP5-20

AF5-45

*FD5-45

*FD5-60

*FD5-90

HC                X

-

FD Cores

FD was 45 and 60 minute rated at the same price

FD is now the FD60, FD5-60 Core as the FD core was the correct price

FD is now FD45, FD5-45

FD90 is now FD90, FD5-90

Although the short description for core contains the fire rating for the door fire ratings still exist for use in submittals. Both AHM and Enterprise/Advantage users are able to assign an alternate submittal short code for these and other attributes as desired.

-

Series - Edge Construction/Cores

GPD – Matching Hardware Edges

PC5, PC5-20, EC5, EC5-20, SL5, SL5-20, AP5, AP5-20, FD5-45, FD5-60, FD5-90, AF5-45, HC

-

GPD – Matching Veneered Edges

PC, PC20, EC, EC20, SL, SL20, AP, AP20, FD45, FD60, FD90, AF45

-

GCD – Mill Option Hardwood Edges

PC, PC20, EC, EC20, SL, SL20, AP, AP20, FD45, FD60, FD90, AF45

-

GMD – Mill Option Softwood Edges

PC, PC20, HC

-

Concealed Closer/OH Holder-Stop

There is no longer a CC – Concealed Closer prep in the price book

This has been combined into one code CH – Concealed Stop Closer

-

Existing preps modified as follows & moved from MISC-P to CLOSER Table

CC to CHC – Concealed Closer

CH to CHS – Concealed Holder/Stop

CF – No Change - Floor Closer

New Table:

CLOSER – Floor/Conc & Conc-Holder/Stop

-

Category A and B – Positive Pressure Tables

To make selection of these preps less confusing the following changes have been made

Short descriptions have been revised: AS1, AS2, AS3, etc.” for Attached Seals - Prints on PO: CAT-A (Attached Seals) - BIS1, BIS2, BIS3, etc.’ for Built-In Seals - Prints on PO: CAT-B (Built-In Seals)

In conjunction with the seals you must also select I or P from LABEL Table