CATALOG/PRICING/OEW INFORMATION
Partial Steelcraft Update 3-13
November 20, 2007
Added FN 14 gauge KD frames
Frame Labels
Restrictions applied to label code SF1131 WH Mylar Label
This will prevent use on double egress frames
FRAME LABEL and FIRE tables
The following Distributor Applied frame labels and ratings have been added to provide a means to indicate these in submittals. There will be no information passed through OEW or on a printed PO. It remains the distributor’s responsibility to verify all information necessary to obtain the label and rating selected for the cut and notch material being ordered. Additionally, an in house or shop labor prep to add the label will need to be applied.
LABEL TABLE
WHDA WH Label Distributor Applied
ULDA UL Label Distributor Applied
FIRE TABLE
B90DA B Label 1 ½ hr Distributor Applied
B60DA B Label 1 hr Distributor Applied
C45DA C Label 45M Distributor Applied
20MDA 20M Label Distributor Applied
Added price on Double Egress Astragal $50.00
Added price on Double Egress Astragal $50.00
FC – Floor Clearance has been flagged as a Hardware Prep so they can be applied to thresholds.
Note that the range of undercut is from 1/8” to 4”. There are maximum undercut restrictions for some door series so if you are in doubt please check the price book
Corrections made to A 16 FL door to allow validation and pricing.
Note: User must add the appropriate Full Louver
Additionally, this door type will not validate in OEW at this time
Added Door Types
The following are applicable to A/AN series only with new OEW attribute default - OMIT TRIM
FG-A-OT Standard FG without trim
FG2-A-OT Standard FG2 without trim
FG3-A-OT Standard FG3 without trim
FGS-A-OT Special FG without trim – special size lite openings
FG2S-A-OT Special FG2 without trim – special size lite openings
FG3S-A-OT Special FG3 without trim – special size lite openings
The following are applicable to H, HF and HW series only & DEZIGNER TRIM with 1/2" glass
V-H-D2, N3-H-D2, N4-H-D2, N5-H-D2, G-H-D2, N-H-D2, LNL-H-G2, FG-H-D2
The following are applicable to H, HF and HW series only & FG DEZIGNER TRIM with 1/4" glass
FG-H, FG2-H, FG3-H
The following are applicable to H, HF and HW series only & FG DEZIGNER TRIM with 1/2" glass
FG-H-D2, FG2-H-D2, FG3-H-D2
The following are applicable to H, HF and HW series only & BEAD & STOP (STEEL) TRIM
Glass thickness available: 1/4", 3/8”, 1/2", 5/8”, 3/4", 13/16”, 1”
V-H-ST, G-H-ST, N3-H-ST, N4-H-ST, N5-H-ST, N-H-ST, LNL-H-ST,
FG-H-ST, FG2-H-ST, FG3-H-ST
OEW ATTRIBUTE CHANGES
Door Label - Removed
13-DADE
Frame Label - Added
9-UL (90 MIN)
Caps - Removed
INVERTED BOTTOM
STEEL TOP SNAPPED IN
STEEL TOP SNAPPED IN & BOTTOM SCREW
Dutch_Astragal changed to
Y, SCREW ON
Y, WELD ON
Corner_Assembly change to
FULL PROFILE WELD
Electric_Hinge_Prep
All reference to HD change to HEAD
Posted
11-19-2007 2:11 PM
by
Jim Butler